Conditions, Cleans, Removes Protein, Disinfects, Rinses, and Stores.
Directions: To condition, clean, remove protein and disinfect lenses, complete these simple steps:
STEP 1: Place at least 3 drops of renu® MULTIPLUS multi-purpose solution on each side of lens surface and gently rub for 20 seconds.
STEP 2: Thoroughly rinse each side of the lens for 5 seconds with renu® MULTIPLUS multi-purpose solution.
STEP 3: Place cleaned contact lenses in the lens case and fill with renu® MULTIPLUS multi-purpose solution. Soak at least 4 hours. Remember to always use fresh solution – discard solution from lens case after each use.
Your lenses are now ready to wear. If any debris remains on contact lenses, rinse with renu® MULTIPLUS multi-purpose solution prior to insertion.
Always follow your eye care professional’s instructions. Based upon your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend additional products or procedures.
If not wearing contact lenses immediately, store in closed lens case. Do not store your lenses in simple saline in place of renu® MULTIPLUS multi-purpose solution. Saline solution will not disinfect.
Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days. If you store your lenses for longer periods of time, they must be cleaned and disinfected with fresh renu® MULTIPLUS multi-purpose solution prior to lens insertion.